Plumbing in Multifamily Buildings Keep the Water Flowing

Plumbing. It’s one of those things for which we all should be grateful, but about which we rarely ever give a thought – at least not until we see water seeping out from under the bathroom door. Fortunately, if and when things go wrong, there are plenty of professionals out there to remedy the problem. Even better, in most of our co-op and condo buildings, there are dedicated staff members working to maintain and service our plumbing systems with the goal of preventing problems before they ever start. 

A Look Back 

Plumbing refers to the system of pipes, tanks and other structures required to supply water, heat and sanitation for a building or dwelling. And it has been a concern for humans for millennia. The earliest known evidence of drains and primitive toilet technology were found among the 5,000 to 8,000 year old Neolithic settlements at Skara Brae on the coast of Scotland’s Orkney Islands.

Water-carrying pipes and cesspools also existed thousands of years ago in the ancient civilizations of Sumer, Akkad and Babylon in the Middle East. Halfway around the world in Mesoamerica, ancient Mayan plumbing included underground aqueducts, flush toilets and household limestone water filters. 

The Romans had a knack for plumbing, and even get credit for the word’s origins, which derives from plumbum, the Latin word for lead. From public bathhouses to massive underground sewer systems, there is no doubt the Romans were into their plumbing systems. Not that they were perfect at it, of course. Case in point; while many households did have private indoor toilets, few of those were connected to the main sewer system for fear of home invasions by rats, and the occasional eruption of flames from underground gas build-ups. 

After Rome fell, most Europeans got lazy and reverted to collecting waste in chamber pots, which were simply dumped out windows into the streets – leading not only to a truly disgusting situation for pedestrians, but also to regular outbreaks of typhoid and cholera that killed thousands. Things began to get (arguably) better when Europeans began using small rivers and waterways to guide waste-laden water away from city centers. Of course, this made those rivers and waterways into reeking, profoundly polluted sewers...but at least there was less poo in the streets. 

In the United States, the first public sewer systems were built in the late 1850s in Chicago and Brooklyn. The first American patent for a fixed water closet was granted in 1857, but the style of toilet we think of today did not come onto the market until the late 1890s. 

Running water remained an elusive goal for much longer, with only about five percent of the US population having it by the end of the Civil War. Most cities would have it by the 1930s, but many rural areas had to wait until the mid 1940s before they could turn on a tap and have fresh water flow into their homes. 

Fast Forward 

In short, life for us modern Americans is pretty good when it comes to plumbing. Whether living in a single-family home or a multifamily residential building, the concepts remain the same when it comes to piping in fresh water and carrying waste away. “There are mostly similarities when comparing high-rise to single-family homes,” says Harris Clark, vice president of Sanitary Plumbing and Heating Corp., based in the Bronx. “Water still comes into the building from a single source – either the municipality or a well, perhaps. Waste still leaves into a singular source – either a city sewer or septic-type system.”

The main difference is that “The scale is obviously amplified in a high-rise,” says Clark. “The piping needs be larger. The quantity of pipes will be increased to serve multiple lines of apartments or individual bathroom lines.”

“Another difference,” says Clark, “is that you are sharing space with others. Their habits can affect you. For example, if there is a blockage in a waste pipe on the second floor, other tenants on that floor, as well of tenants in the floors above, may find water backing up into their apartments.”

The height of a building also can make a difference for some residents, Clark continues. “In buildings with more than six stories, the domestic water is usually distributed from the roof, from a roof tank. This can become problematic for tenants in some penthouses or other upper floor apartments where the laws of gravity fail to generate adequate water pressure,” he says. 

Problems Add Up – Drop By Drop 

As with any system within a co-op or condo building, problems can arise with plumbing. According to Philip Kraus, president of Fred Smith Plumbing & Heating Company. in Manhattan, the most common issues include “leaks, broken piping and valves, clogged drains, defects in hot water heating equipment and controls, buildup of scale and corrosion in piping and tanks, defective pressure reducing valves and defective plumbing fixtures and fittings.” 

“Depending on the age of the building and how well the plumbing was installed, the issues can differ. Says Stuart Liben of NYC Plumbing & Heating Inc. in Brooklyn. “I think a main reason why some buildings work better than others is regular maintenance. A competent person taking care of issues as they occur makes all the difference.” 

He adds that “Faucets and shower controls get clogged and leak, or cartridges wear out. Toilets run or leak. The mechanisms break down or the seals break. Pipes get clogged. Drains get loose. All of these things need attention as they occur.”

Staying Ahead of the Game

One of the best ways to avoid major plumbing issues in a co-op or condo building – no matter the size or scale – is through regular maintenance. “A periodic flushing and draining of the main line to remove corrosion products that come in from the street” is advisable, says Kraus. “Corrosion products and sediments coming in from the street can foul piping, controls and plumbing fixtures. [Building staff] should also observe all system pressures, gauges and thermometers on a daily basis.”

Clark also recommends active evaluations and long-term preparations for the building’s piping system. He encourages the maintenance of a visual checklist of any exposed building piping to be proactive in its replacement. “In addition, when a unit undergoes a renovation, make sure a visual inspection is completed to replace any piping that may show signs.”

Building staff should be diligent in creating and following up on a comprehensive maintenance plan. “If backups are prevalent, regularly scheduled drain maintenance is recommended,” says Clark. Staff also should ensure that “The water riser valves are operating properly for each line. If a leak occurs, this can help isolate the issue to only the affected line and not shut down the entire building unnecessarily.”

Regular inspections are mandated for co-op and condo plumbing systems as well. The New York City Department of Buildings (DOB) requires an annual boiler inspection while the Fire Department of New York (FDNY) regulates testing and inspections of sprinkler and standpipe systems, offering boards, staff and residents more ways to avoid trouble by planning ahead.

When people hear stories about flooding in a building due to a plumbing issue, talk sometimes turns to a backflow valve. “Backflow prevention devices are used as safety devices,” says Kraus. “They are used to make sure that once water enters a particular area, it can not “go back” and become harmful to a larger area.” 

Kraus shares an example. “Water enters a boiler, where it is used to create heat,” he says. “Occasionally, the boiler is treated with a chemical to help the boiler operate efficiently. At the same time, the FDNY opens a hydrant right outside the building. Since FDNY requires such a large amount of water to help put out a fire, the water from the building and the boiler may be siphoned from inside the building. Without a backflow preventer, the chemically mixed water may now end up in the building’s water supply, and possibly the water supply of the entire block. The backflow preventer acts as a barrier. If such siphoning action occurs, the water will instead empty out onto the building drain through a discharge port in the backflow’s design”

Backflow devices can be complex beasts and should not be installed by amateurs. “They should be installed and maintained on a regular basis to adhere to Department of Buildings and Department of Environmental Protection regulations,” says Liben.

While the backflow devices can certainly prevent potentially serious issues with water quality and safety, they also can be extremely expensive and affect other systems in the bulding, says Kraus. “They need to be tested by a certified individual on a yearly basis. Backflow prevention will cause a reduction of operating pressures by as much as 20 pounds. A reduction in pressure could cause problems in the performance of plumbing fixtures and equipment.” 

Lending a Hand

No one wants a plumbing problem, especially in their own unit. Fortunately, there are a number of things residents can do to help ease the pressure on their building’s plumbing system. “Be gentle when turning handles; don’t allow items other than water and waste to go down drains, and call for help or ask questions when you see something that doesn’t seem right,” says Liben. “Don’t allow excess water to flow on floors from showers or sinks.” 

Clark encourages unit owners and shareholders to “Always check to make sure the plumbing fixtures are 100 percent closed when not in use. Always make sure toilets are not running. Report any signs of leaks to building staff as soon as possible.”

Who to Call 

When plumbing trouble does rear its inopportune head, it can be difficult to decide who exactly should tackle the problem. If it’s in a unit, should the resident pull out the toolbox and fire up the YouTube how-to videos? Or should the building’s super handle the job? When should a professional plumber be called in to handle the situation?

In a multifamily residential building, in general, “Fixture repairs could be handled by the building staff,” says Kraus. “Most other repairs have to be filed with the Department of Buildings by a licensed plumber.” 

Clark agrees that general fixture repairs such as faucets, toilets and showers can be handled by building staff and adds, “Any type of piping replacement requires the services of a master licensed plumbing company.” 

Says Liben, “Simple repairs like minor clogs, loose drains, dripping faucets or hair clogged in drains can be handled in-house. Some buildings have more capabilities than others.”

When it comes to plumbing, it takes foresight, planning and the commitment of the entire building to ensure that all systems run their best. With fresh water running from our faucets and whisper flushes that remove all waste, it is more than worth the effort.   

Liz Lent is a freelance writer and reporter, and a frequent contributor to The Cooperator. 

Related Articles

Reopening & Water Safety

CDC, EPA Offer Tips for Avoiding Mold & Other Contaminants

Getting the Lead Out

Protecting New York City’s Drinking Water

Plumbing Practices

Make Sure Your Pipes Are On Point